Host–Guest Complexation of Amphiphilic Molecules at the Air–Water Interface Prevents Oxidation by Hydroxyl Radicals and Singlet Oxygen

The oxidation of antioxidants by oxidizers imposes great challenges to both living organisms and the food industry. Here we show that the host–guest complexation of the carefully designed, positively charged, amphiphilic guanidinocalix[5]arene pentadodecyl ether (GC5A‐12C) and negatively charged oleic acid (OA), a well‐known cell membrane antioxidant, prevents the oxidation of the complex monolayers at the air–water interface from two potent oxidizers hydroxyl radicals (OH) and singlet delta oxygen (SDO). OH is generated from the gas phase and attacks from the top of the monolayer, while SDO is generated inside the monolayer and attacks amphiphiles from a lateral direction. Field‐induced droplet ionization mass spectrometry results have demonstrated that the host–guest complexation achieves steric shielding and prevents both types of oxidation as a result of the tight and “sleeved in” physical arrangement, rather than the chemical reactivity, of the complexes.     

Enhanced Photoelectrochemical Water Oxidation from CdTe Photoanodes Annealed with CdCl2

Most CdTe photoanodes and photocathodes show positive and negative photocurrent onset potentials for water oxidation and reduction, respectively, and are thus unable to drive photoelectrochemical (PEC) water splitting without external applied biases. Herein, the activity of a CdTe photoanode having an internal p‐n junction during PEC water oxidation was enhanced by applying a CdCl₂ annealing treatment together with surface modifications. The resulting CdTe photoanode generated photocurrents of 1.8 and 5.4 mA cm^?2 at 0.6 and 1.2 V_RHE, respectively, with a photoanodic current onset potential of 0.22 V_RHE under simulated sunlight (AM 1.5G). The CdCl₂ annealing increased the grain sizes and lowered the density of grain boundaries, allowing more efficient charge separation. Consequently, a two‐electrode tandem PEC cell comprising a CdTe‐based photoanode and photocathode split water without any external bias at a solar‐to‐hydrogen conversion efficiency of 0.51 % at the beginning of the reaction.     

Enriched Surface Oxygen Vacancies of Photoanodes by Photoetching with Enhanced Charge Separation

A facile photoetching approach is described that alleviates the negative effects from bulk defects by confining the oxygen vacancy (O_vac) at the surface of BiVO₄ photoanode, by 10‐minute photoetching. This strategy could induce enriched O_vac at the surface of BiVO₄, which avoids the formation of excessive bulk defects. A mechanism is proposed to explain the enhanced charge separation at the BiVO₄ /electrolyte interface, which is supported by density functional theory (DFT) calculations. The optimized BiVO₄ with enriched surface O_vac presents the highest photocurrent among undoped BiVO₄ photoanodes. Upon loading FeOOH/NiOOH cocatalysts, photoetched BiVO₄ photoanode reaches a considerable water oxidation photocurrent of 3.0 mA cm^?2 at 0.6 V vs. reversible hydrogen electrode. An unbiased solar‐to‐hydrogen conversion efficiency of 3.5 % is realized by this BiVO₄ photoanode and a Si photocathode under 1 sun illumination.     

Quantitative evaluation on oil diffusion mechanisms in nano‐organic‐montmorillonite modified caster oil‐based polyurethane foam for oil/water separation

To improve the oil absorbency of caster oil‐based polyurethane foam, nano‐organic‐montmorillonite (OMMT) was used for the additives. The aim of this study is to evaluate the oil diffusion mechanism and dispersion uniformity of OMMT modified caster oil‐based polyurethane (MPU) using experiments and molecular dynamic simulation. Molecule movement and molecule trajectory of oil was investigated by molecular dynamic simulation and numerical simulation. According to the quantitative analyzing results, the diffusion model was put forward. The average diffusion coefficient of crude oil in 0, 1, 2 wt%, 4, and 6 wt% MPU is 2.4 × 10^?4 cm²/s, 2.6 × 10^?4 cm²/s, 3.0 × 10^?4 cm²/s, 3.2 × 10^?4 cm²/s, and 3.3 × 10^?4 cm²/s, respectively. It indicated that crude oil appeared gradient in the MPU. The optimal diffusion direction of crude oil is (0, 0, 1) crystal face, and the small particles of crude oil are easy to be adsorbed. The two‐dimensional diffusion trajectory of crude oil is nonlinear. The diffusion model includes the diffusion of crude oil at the interface of oil and polyurethane, surface diffusion and pore diffusion, and pore adsorption. Furthermore, the diffusion model showed that the van der Waals force was the main reason for crude oil diffusion or adsorption. OMMT could improve the ability of oil/water separation of polyurethane.     

Chitosan‐modified graphene oxide as a modifier for improving the structure and performance of forward osmosis membranes

Chitosan (CS) with good hydrophilicity and charged property was used to modify graphene oxide (GO), the obtained GO‐CS was used as a novel modifier to fabricate thin film composite forward osmosis (FO) membranes. The results revealed that the amino groups on CS reacted with carboxyl groups on GO, and the lamellar structure of the GO nanosheets was peeled off by CS, resulting in the reducing of their thicknesses. The GO‐CS improved the hydrophilicity of polyethersulfone (PES) substrate, and their contact angles decreased to 64° with the addition of GO‐CS in the substrate. GO‐CS also increased the porosity of the substrate and surface roughness of FO membrane, thereby optimizing the water flux and reverse salt flux of FO membrane. The average water flux of the FO membrane reached the optimal flux of 21.34 L/(m² h) when GO‐CS addition was 0.5 wt%, and further addition of GO‐CS to the substrate would decrease the water flux of FO membrane, and the reverse salt flux also decreased to the lowest value of 2.26 g/(m² h). However, the salt rejection of the membrane increased from 91.4% to 95.1% when GO‐CS addition increased from 0.5 to 1.0 wt% under FO mode using 1 mol/L sodium chloride (NaCl) solution as draw solution (DS). In addition, high osmotic pressure favored water permeation, and at the same concentration of DS, magnesium chloride (MgCl₂) exhibited better properties than NaCl. These results all suggested that GO‐CS was a good modifier to fabricate FO membrane, and MgCl₂ was a good DS candidate.     

Green approaches for the synthesis of nucleotides,their conjugates and analogues

Abstract

We have developed original one-pot and protecting group-free approaches, which are also user-friendly and reliable, to synthesize nucleotides and derivatives starting from nucleoside 5’-monophosphates. Both methods present convenient set-up, i.e., non-dry solvents and reagents, substrates in their sodium or acid form, and commercially available and cheap phosphorus reagents as sodium and potassium salts.     

Evaluation,Pitfalls and Recommendations for the “Water Layer Test” for Solid Contact Ion‐selective Electrodes

The “water layer test” is a crucial validation step of solid‐contact ion‐selective electrodes. It can confirm or contest the claim that the tested electrode is indeed a genuine solid contact electrode without an aqueous film between the ion‐selective membrane and its solid contact. Information about the presence of a water layer is essential for the interpretation of drifts in the electrode potentials commonly experienced with solid contact electrodes. Since its publication, the water layer test has been ubiquitously used, but without a standardized protocol the interpretation (or misinterpretation) of the test results led to uncertainties in the conclusions. Through both experiments and simulations based on theoretical models we have investigated the experimental parameters that can influence the results of the water layer test. We propose guidelines to minimize the possibility of misinterpretation of the results of the water layer test by considering the key factors that affect the shape of transients recorded during the water layer test. Most importantly, we emphasize the importance of allowing sufficient time for conditioning the tested electrode before the water layer test and providing adequate time for equilibration during the experiment. Using a thin ion‐selective membrane and thin solid‐contact layer for the tests is also recommended.     

SO 2 sorption properties of fly ash zeolites

In the presented study, the sulfur dioxide sorption properties of fly ash zeolite X were investigated. Sorption tests were performed on fly ash zeolite samples that were not prepared specially for sorption, in addition to dried samples and samples in the presence of water vapor. The samples saturated with water vapor showed the highest sorption capacity. The sorption capacity of the samples additionally dried prior to the sorption experiment was higher than that of the samples that were not specially prepared for the sorption test. Regeneration tests indicated relatively good regeneration properties. The obtained results were described with the use of Langmuir, Sips, and Dubinin–Astakhov models, with the Dubinin–Astakhov model providing the best fit.     

The use of water-soluble phthalocyanines as textile dyes in nylon/elastane fabric: fastness and antibacterial effectiveness

This work reports on dyeing of nylon/elastane fabric with water-soluble phthalocyanines ( 1-4 ) bearing quinoline 5-sulfonic acid substituents on the peripheral or nonperipheral positions and determining the antibacterial efficiency of the phthalocyanine compounds and the dyed nylon/elastane fabrics. The light, washing, water, perspiration, and rubbing fastness properties of nylon/elastane fabrics dyed with phthalocyanines were also determined. The results showed that all dyed fabrics showed very good wet fastness values. The lightfastness value of the nylon/elastane fabric dyed with phthalocyanine dye ( 1 ) showed a much better value than the others. Also, the antibacterial efficiencies of the dyed nylon fabrics and the dye compounds were investigated against a gram-negative ( Escherichia coli ) and a grampositive ( Staphylococcus aureus ) bacteria by using disc diffusion method. The results showed that the dyed nylon/elastane fabrics and the compounds exhibited antibacterial activities against both bacteria.     

An improved sealed quartz‐tube method for the determination of hydrogen isotopes in water

Hydrogen stable isotope analysis has been a valuable tool in the fields of geochemistry and ecological research as well as many other research fields. The methods are mainly divided into the dual‐inlet method (off‐line method) and continuous flow method. The dual‐inlet method is complicated and inefficient, but it is still important because of its high precision and wide application range. Although the continuous flow method improves the experimental efficiency, the memory effect is noticeable and the accuracy is reduced. An improved sealed quartz‐tube method is proposed in this paper. The sample is sealed in a capillary tube and placed in a quartz tube containing chromium powder. It is then packaged, evacuated, reacted at a high temperature, and analyzed for hydrogen isotope ratio. Excellent data accuracy, good reproducibility (<1‰), and no memory effect occurred in the method. The process is relatively simple, and the experimental efficiency is greatly improved, which provides an effective method for the analysis of hydrogen isotopes in complex liquid samples.